Carbon Fiber Replacement Side Mirror Shells With Bases by Scopione for 2009-2014 Lamborghini Gallardo – Fit the Factory Mirrors 401857507A / 401857508A
Accent the side mirrors of your Lamborghini Gallardo LP560-4, Gallardo LP550-2, Gallardo LP560-2 50 Anniversario, Gallardo LP570-4 Superleggera, Gallardo LP570-4 Spyder Performante, Gallardo LP570-4 Super Trofeo Stradale and Gallardo LP570-4 Squadra Corse with genuine carbon-fiber Replacement Side Mirror Shells. Designed as precision carbon fiber replacements for the Gallardo’s 2010-on exterior mirrors, these Replacement Side Mirror Shells are crafted to OEM dimensions for a lightweight exterior upgrade with the unmistakable depth of real woven carbon. Molded in real 2×2 3K twill weave under a glossy, UV-resistant clear coat, they replace the factory mirror shells and bases and keep their shine outdoors. They won’t fit the 2004-2008 Gallardo or a car with the earlier mirror, which has a different glass size.
Key Features & Benefits
- Authentic Carbon Fiber – Real 2×2 3K twill weave, not a hydro-dipped or printed finish.
- OEM-Style Fitment – Made as a replacement for the Lamborghini Gallardo LP560-4, Gallardo LP550-2, Gallardo LP560-2 50 Anniversario, Gallardo LP570-4 Superleggera, Gallardo LP570-4 Spyder Performante, Gallardo LP570-4 Super Trofeo Stradale and Gallardo LP570-4 Squadra Corse.
- UV-Resistant Clear Coat – Glossy finish that resists fading and the elements.
- Straightforward Install – Secures with the factory mirror fixings; no cutting or drilling.
Why Choose Scopione?
- Fitment Specialists – A focused catalog of model-specific aftermarket parts.
- Model-Specific Design – Each part is made for a specific make, model, and year range.
- Careful Packaging – Boxed to arrive safely.
- Here to Help – Questions on fitment? Compare against the photos or reach out before you buy.
Compatibility
Replacement Mirror Shells With Bases Fit the Lamborghini Gallardo Models Below – These Will Replace the Original Mirror Housings and Bases ONLY:
- Fits Lamborghini Gallardo LP560-4 Models: 2009, 2010, 2011, 2012, 2013, 2014
- Fits Lamborghini Gallardo LP550-2 Models: 2010, 2011, 2012, 2013, 2014
- Fits Lamborghini Gallardo LP560-2 50 Anniversario Models: 2014
- Fits Lamborghini Gallardo LP570-4 Superleggera Models: 2010, 2011, 2012, 2013, 2014
- Fits Lamborghini Gallardo LP570-4 Spyder Performante Models: 2011, 2012, 2013, 2014
- Fits Lamborghini Gallardo LP570-4 Super Trofeo Stradale Models: 2012, 2013
- Fits Lamborghini Gallardo LP570-4 Squadra Corse Models: 2013, 2014
- **Fits Only: Gallardo With the 2010-On Exterior Mirror 401857507A / 401857508A (RHD 402857507A / 402857508A) or the LP570-4 Mirror 403857501B / 403857502B – as Shown on Images
- **Will NOT Fit: the 2004-2008 Gallardo, the 2008 Superleggera or 2009 cars with the earlier mirror 401857507 / 401857508 (different glass size)
- **2009 Models – Check Your Mirror: the 2009 LP560-4 Coupe and Spyder are catalogued with the earlier mirror 401857507 / 401857508 (RHD 402857507 / 402857508, different glass size) – these shells fit cars with the later mirror 401857507A / 401857508A
- **Note: Carbon fiber replacement for the painted housings of the 2010-on Lamborghini Gallardo exterior mirrors – the two mirror shells and the two base (leg) covers. They fit the factory mirror 401857507A / 401857508A (RHD 402857507A / 402857508A) of the LP560-4 (including the 2013-2014 facelift), LP550-2 and LP560-2 50 Anniversario, and the same-shape mirror 403857501B / 403857502B (RHD 404857501B / 404857502B; Blancpain edition C) of the LP570-4 Superleggera, Spyder Performante, Super Trofeo Stradale and Squadra Corse. The 2004-2008 Gallardo, the 2008 Superleggera and the 2009 LP560-4 are catalogued with the earlier mirror 401857507 / 401857508 (different glass size) – check the mirror on a 2009 car. The glass, adjusting unit and wiring move over from the factory mirror. Scopione also makes these mirror shells in matte carbon fiber.
Installation:
- Parts are hand made to Replace Factory Mirror Shells and Bases
- No modifications are needed
- Professional Installation is advised
- Parts are designed specifically for your make and model
- Secured in place with the factory mirror fixings
Scopione Package Contents:
- ( 1 ) One Packaging Box
- ( 2 ) Replacement Side Mirror Shells (Driver Side and Passenger Side)
- ( 2 ) Replacement Mirror Base Covers (Driver Side and Passenger Side)
- ( 0 ) Installation Manual, Tools, Hardware are NOT Included
Finish the Look
A clean, well-fitting upgrade for the Lamborghini Gallardo LP560-4, Gallardo LP550-2, Gallardo LP560-2 50 Anniversario, Gallardo LP570-4 Superleggera, Gallardo LP570-4 Spyder Performante, Gallardo LP570-4 Super Trofeo Stradale and Gallardo LP570-4 Squadra Corse – compare it to your factory part using the photos and you’re set.
Additional Information:
Note: If, at any time, you decide to remove the Scopione part(s), the process is fully reversible.
Fits the Factory Exterior Mirror Part Numbers (LHD / RHD, Left / Right): 401857507A | 401857508A | 402857507A | 402857508A | 403857501B | 403857502B | 404857501B | 404857502B | 403857501C | 403857502C | 404857501C | 404857502C
For Reference – Earlier Gallardo Mirror Part Numbers (2004-2009 Mirror With a Different Glass Size – These Shells Do NOT Fit It): 401857507 | 401857508 | 402857507 | 402857508 | 403857501A | 403857502A | 404857501A | 404857502A
Installation guidance for Scopione replacement and add-on parts. For best results, test-fit before any paintwork, drilling, trimming, or permanent installation. If you would like us to confirm compatibility or your installation approach before you begin, contact us with clear photos of your OEM part and any relevant options.
Quick install overview
- Unbox & inspect: confirm the part, finish, and contents before starting. Keep all packaging until installation is complete.
- Dry test-fit first: verify alignment, gaps, and clearance before any drilling, trimming, paintwork, or permanent mounting.
- Replacement parts: typically use OEM mounting points and may reuse factory hardware—tighten evenly and avoid over-torquing carbon.
- Add-on parts: may install with 3M VHB tape, brackets, or light trimming depending on your setup and existing modifications.
- Protect the finish: use clean microfiber towels and masking tape on edges while positioning and aligning.
- Professional installation recommended: especially for aero components and precision-fit parts.
Before you start
Work on a clean, well-lit surface. Confirm left/right orientation, compare the part to your OEM component, and verify that mounting points and edges align during a dry-fit. If your vehicle has aftermarket bumpers/diffusers, previous repairs, or custom bodywork, fitment may vary—do not force alignment before checking the install position.
Dry-fit & alignment tips
Position the part gently and never force it into place. If fasteners are used, hand-start them first, then check gaps, edge alignment, and clearance before tightening evenly. Use low-tack tape to mark reference points so you can repeat the exact placement after cleaning or adhesive preparation.
Adhesive installs (3M tape)
Prep is everything. Clean both surfaces with isopropyl alcohol, make sure they are fully dry, and install in a warm environment whenever possible. Apply firm, even pressure along the entire tape line to ensure full contact. For best adhesion, avoid washing or rain exposure immediately after installation and allow adequate cure time before heavy use.
Fastener installs (bolts/screws/clips)
Hand-start all fasteners to prevent cross-threading, then tighten gradually and evenly to keep the part aligned. Do not over-tighten—carbon fiber can crack from excessive point load. When possible, follow OEM torque guidance for that mounting location and use washers/spacers as appropriate to distribute pressure.
Installation details
- Details: Installation specifics depend on the part. Review the Part Details and Features tabs for guidance, or contact us for confirmation before you begin.
Suggested tools & supplies
In most cases you’ll want basic hand tools, trim tools, clean microfiber towels, isopropyl alcohol, and masking tape. If using 3M tape, gentle warming (heat gun on low or a warm environment) helps improve initial adhesion. Exact tools and supplies vary by part and vehicle setup.
Important note on modifications
Only drill, trim, or perform paintwork after a successful dry test-fit and confirmed alignment. If anything looks off, stop before making permanent changes and contact us—we’ll help you verify the correct placement and approach.
After-install checklist
Verify clearance and movement (full steering lock where applicable), confirm there is no contact with heat sources, and ensure all edges are seated securely. If installed with fasteners, re-check alignment and tightness after initial use to account for settling and vibration.
Care & maintenance
Cleaning: Use a pH-neutral car shampoo and clean microfiber towels.
Avoid: harsh solvents (acetone, brake cleaner), abrasive pads, aggressive cutting compounds, and pressure-washing directly at edges/seams.
Protection: Treat the finish like painted bodywork. A quality sealant or ceramic coating may be used if compatible with your detailer's process.
For long-term gloss and UV protection, many owners choose a quality sealant or ceramic coating applied by a professional detailer. If you want recommendations for safe products for your finish or climate, contact us and we’ll help.
If something doesn’t line up
Stop before forcing, drilling, trimming, or making any permanent changes. Misalignment is often caused by aftermarket bumpers/diffusers, prior repairs/bodywork, or positioning during the dry-fit. Send clear photos of the mounting points, the surrounding area, and a wider shot of the overall fitment, and we’ll help you troubleshoot the correct placement and next step.
Need tracking or delivery help?
You can view shipment updates on our Order Tracking page. If you need assistance, contact us with your order number and (if applicable) photos of the box/label, and we’ll help resolve it quickly.
Need help before installing? Contact us
with clear photos of your OEM part and we’ll guide you.
Quick answers on fitment, finish, shipping, and warranty. If you're unsure about compatibility, message us with clear photos of your OEM part (and any relevant options) and we'll help confirm fitment.
Will this fit my vehicle?
Start with the Compatibility tab on this page. Fitment can vary by factory options, model-year changes, and aftermarket bumpers/diffusers.
If you'd like a quick confirmation before ordering, send clear photos of your OEM part (and any relevant options) and we'll help verify compatibility.
What warranty do you offer?
Most products include a 6–12 month limited warranty against manufacturing defects (coverage varies by item).
To protect coverage, please test-fit before any cutting, drilling, paintwork, or permanent installation.
Warranty does not cover damage caused by improper installation, accidents/impact, road debris, or harsh chemicals/cleaners.
Do your carbon-fiber parts look exactly like the photos?
Carbon fiber is hand-laid, so subtle variations in weave direction, pattern alignment, and gloss can occur—this is normal and part of the material's character.
Every piece is inspected for finish quality before it ships.
Is installation hardware included?
Hardware inclusion varies by product. If hardware is not listed in the product details, the part is typically designed to reuse OEM mounting points and factory fasteners.
For best results—and to protect the finish—professional installation is recommended.
Do parts come painted, and can I paint carbon fiber?
Most carbon-fiber parts arrive with a clear-coated finish unless otherwise stated. You can leave the carbon exposed, wrap it, or paint it for a matched look.
For best results, test-fit before any paintwork and follow your installer/body shop's prep process for proper adhesion.
When will my order ship and how do I track it?
Orders placed before 1 PM EST usually ship the same or next business day, and all in-stock items ship within 3–5 business days at the latest — with free standard shipping across the USA and Canada. If an item is made-to-order or temporarily out of stock, we'll contact you with the expected lead time.
Once your order ships, tracking is emailed automatically and you can also check updates on our Order Tracking page.
How are parts packaged, and what if there is shipping damage?
Every part is carefully packed to protect the finish in transit and shipped in a plain outer carton. Please inspect your delivery upon arrival.
If anything looks damaged or missing, take clear photos of the outer box, shipping label, packing materials, and the item, then contact us within 48 hours
so we can resolve it as quickly as possible.
Do you ship internationally?
Yes, we ship internationally. Available shipping options and rates are shown at checkout based on your destination and package size.
Import duties, taxes, and any broker/clearance fees (if applicable) are determined by your country and are the buyer’s responsibility.
Can I cancel or change my order after purchase?
If you need to change or cancel an order, please contact us as soon as possible. If the order has not shipped, we'll do our best to accommodate your request.
Once an order is in processing or has shipped, changes may be limited.
How do I care for carbon fiber?
Treat carbon fiber like painted bodywork: wash with a pH-neutral car shampoo, rinse thoroughly, and dry with clean microfiber towels.
Avoid harsh solvents, abrasive pads, and aggressive cutting compounds. If you're unsure what's safe for your finish or climate (UV/heat), message us and we'll advise.
Please Note: Products sold by Scopione are intended for lawful use only. Scopione is not affiliated with or endorsed by any vehicle manufacturer.
All logos, names, and images shown are used for nominative and informational purposes.
Still have questions? Contact us
Scopione is designed for enthusiasts who expect precise fitment, a high-quality finish, and a premium buying experience. Here is what you can count on when you choose Scopione carbon-fiber products.
Fitment confidence
- Compatibility-first: start with the Compatibility tab for the most accurate fitment notes.
- Pre-purchase support: if anything is unclear, send clear photos of your OEM part and we’ll help verify compatibility.
- Installer-friendly process: we recommend a dry test-fit before any paintwork or permanent modifications.
Premium finish standards
Carbon fiber is hand-laid, so subtle variations in weave direction, pattern alignment, and gloss can occur—this is normal and part of the material. Every piece is inspected for overall finish quality before it ships.
Premium ownership experience
- Protected shipping: parts are carefully packed to help protect the finish in transit and shipped in a plain outer carton.
- Fast resolution: if anything arrives damaged or missing, contact us within 48 hours with clear photos and we’ll assist promptly.
- Warranty clarity: most products include a 6–12 month limited warranty against manufacturing defects (coverage varies by item).
Care & maintenance guidance
We provide clear care guidance so your carbon fiber stays looking its best: wash with a pH-neutral car shampoo, dry with clean microfiber towels, and avoid harsh solvents or abrasive pads.
Please Note: Products sold by Scopione are intended for lawful use only. Scopione is not affiliated with or endorsed by any vehicle manufacturer.
All logos, names, and images shown are used for nominative and informational purposes.
Still have questions? Contact us
Shop
William F. –
Nice view! I like how much “pop” having these mirrors add to my Gallardo. It definitely makes me feel better when attending car shows.
John L. –
They look great! I have put my lambo through some serious mods before and these mirrors were by far the easiest of them to install.