Carbon Fiber Rear Bumper Diffuser by Scopione for 2009-2014 Lamborghini Gallardo LP560-4 / LP550-2 / LP570-4 – Replaces the Factory Rear Diffuser 400807527C
Finish the rear bumper of your Lamborghini Gallardo LP560-4, Gallardo LP550-2, Gallardo LP560-2 50 Anniversario, Gallardo LP570-4 Superleggera, Gallardo LP570-4 Spyder Performante and Gallardo LP570-4 Super Trofeo Stradale with a real carbon-fiber Rear Bumper Diffuser. Finished in authentic carbon fiber, this Rear Bumper Diffuser adds a premium exterior accent to your Gallardo while keeping the factory mounting points for a clean, OEM-style install. Molded in genuine 2×2 3K twill weave under a glossy, UV-resistant clear coat, it replaces the factory rear diffuser and keeps its shine outdoors. It won’t fit the 2004-2008 Gallardo or the 2013-2014 facelift LP560-4 with the Squadra Corse-style rear bumper; on the LP570-4s it takes the place of the finned diffuser.
Key Features & Benefits
- Authentic Carbon Fiber – Real 2×2 3K twill weave, not a hydro-dipped or printed finish.
- OEM-Style Fitment – Made as a replacement for the Lamborghini Gallardo LP560-4, Gallardo LP550-2, Gallardo LP560-2 50 Anniversario, Gallardo LP570-4 Superleggera, Gallardo LP570-4 Spyder Performante and Gallardo LP570-4 Super Trofeo Stradale.
- UV-Resistant Clear Coat – Glossy finish that resists fading and the elements.
- Straightforward Install – Secures with the factory fasteners; no cutting or drilling.
Why Choose Scopione?
- Fitment Specialists – A focused catalog of model-specific aftermarket parts.
- Model-Specific Design – Each part is made for a specific make, model, and year range.
- Careful Packaging – Boxed to arrive safely.
- Here to Help – Questions on fitment? Compare against the photos or reach out before you buy.
Compatibility
Replacement Rear Diffuser Fits the Lamborghini Gallardo Models Below – This Will Replace the Original Rear Diffuser ONLY:
- Fits Lamborghini Gallardo LP560-4 Models: 2009, 2010, 2011, 2012, 2013, 2014
- Fits Lamborghini Gallardo LP550-2 Models: 2010, 2011, 2012, 2013, 2014
- Fits Lamborghini Gallardo LP560-2 50 Anniversario Models: 2014
- Fits Lamborghini Gallardo LP570-4 Superleggera Models: 2010, 2011, 2012, 2013, 2014
- Fits Lamborghini Gallardo LP570-4 Spyder Performante Models: 2011, 2012, 2013, 2014
- Fits Lamborghini Gallardo LP570-4 Super Trofeo Stradale Models: 2012, 2013
- **Fits Only: Gallardo 2009-2014 Rear Bumper 400807497C / 400807497D (LP560-4, LP550-2, LP570-4) – LP560-4 Style Diffuser as Shown on Images
- **Will NOT Fit: the 2004-2008 Gallardo (rear bumper 400807497A / 400807497B) or the 2013-2014 facelift LP560-4 with the Squadra Corse-style rear bumper
- **2013-2014 Facelift Models Do Not Fit: the facelifted LP560-4 Coupe and Spyder carry the Squadra Corse-style upper rear bumper 400807497F / 400807497G with its own lower diffuser 400807527R / 400807527S – this diffuser fits cars with the 400807497C / 400807497D rear bumper; compare your rear bumper with the images before ordering
- **LP570-4 Superleggera, Spyder Performante and Super Trofeo Stradale: they share the 400807497C / 400807497D rear bumper – on these cars this diffuser takes the place of the factory finned diffuser 403807527A / 403807527B / 403807527C / 403807527D with the smooth LP560-4 design
- **Note: Carbon fiber replacement for the factory rear diffuser of the 2009-2014 Lamborghini Gallardo – the lower panel of the rear bumper 400807497C (EU) / 400807497D (USA) around the four exhaust outlets. A direct replacement on the LP560-4 and LP550-2: ‘REAR DIFFUSER’ 400807527C (standard), 400807527D (USA), 400807527E / 400807527F (Style Pack EU / USA). The LP570-4 Superleggera, Spyder Performante and Super Trofeo Stradale use the same rear bumper; on them it takes the place of the finned diffuser 403807527A / 403807527B / 403807527C (carbon) / 403807527D with the smooth LP560-4 design. The 2013-2014 facelift LP560-4 has the Squadra Corse-style rear bumper 400807497F / 400807497G with its own diffuser 400807527R / 400807527S, so it does not fit those cars – compare your rear bumper with the images. It fastens with the factory fasteners – no hardware is included. Scopione also makes the matching carbon rear bumper assembly (400807497C / 400807497D) and the carbon front center splitters for the same cars.
Installation:
- Parts are hand made to Replace Factory Rear Diffuser
- No modifications are needed
- Professional Installation is advised
- Parts are designed specifically for your make and model
- Secured in place with the factory fasteners
Scopione Package Contents:
- ( 1 ) One Packaging Box
- ( 1 ) Replacement Rear Bumper Diffuser
- ( 0 ) Installation Manual, Tools, Hardware are NOT Included
Make It Yours
An easy way to set your Lamborghini Gallardo LP560-4, Gallardo LP550-2, Gallardo LP560-2 50 Anniversario, Gallardo LP570-4 Superleggera, Gallardo LP570-4 Spyder Performante and Gallardo LP570-4 Super Trofeo Stradale apart without a full body kit.
Additional Information:
Note: If, at any time, you decide to remove the Scopione part(s), the process is fully reversible.
Replaces / Takes the Place of Factory Rear Diffuser Part Numbers: 400807527C | 400807527D | 400807527E | 400807527F | 403807527A | 403807527B | 403807527C | 403807527D
Installation guidance for Scopione replacement and add-on parts. For best results, test-fit before any paintwork, drilling, trimming, or permanent installation. If you would like us to confirm compatibility or your installation approach before you begin, contact us with clear photos of your OEM part and any relevant options.
Quick install overview
- Unbox & inspect: confirm the part, finish, and contents before starting. Keep all packaging until installation is complete.
- Dry test-fit first: verify alignment, gaps, and clearance before any drilling, trimming, paintwork, or permanent mounting.
- Replacement parts: typically use OEM mounting points and may reuse factory hardware—tighten evenly and avoid over-torquing carbon.
- Add-on parts: may install with 3M VHB tape, brackets, or light trimming depending on your setup and existing modifications.
- Protect the finish: use clean microfiber towels and masking tape on edges while positioning and aligning.
- Professional installation recommended: especially for aero components and precision-fit parts.
Before you start
Work on a clean, well-lit surface. Confirm left/right orientation, compare the part to your OEM component, and verify that mounting points and edges align during a dry-fit. If your vehicle has aftermarket bumpers/diffusers, previous repairs, or custom bodywork, fitment may vary—do not force alignment before checking the install position.
Dry-fit & alignment tips
Position the part gently and never force it into place. If fasteners are used, hand-start them first, then check gaps, edge alignment, and clearance before tightening evenly. Use low-tack tape to mark reference points so you can repeat the exact placement after cleaning or adhesive preparation.
Adhesive installs (3M tape)
Prep is everything. Clean both surfaces with isopropyl alcohol, make sure they are fully dry, and install in a warm environment whenever possible. Apply firm, even pressure along the entire tape line to ensure full contact. For best adhesion, avoid washing or rain exposure immediately after installation and allow adequate cure time before heavy use.
Fastener installs (bolts/screws/clips)
Hand-start all fasteners to prevent cross-threading, then tighten gradually and evenly to keep the part aligned. Do not over-tighten—carbon fiber can crack from excessive point load. When possible, follow OEM torque guidance for that mounting location and use washers/spacers as appropriate to distribute pressure.
Installation details
- Details: Installation specifics depend on the part. Review the Part Details and Features tabs for guidance, or contact us for confirmation before you begin.
Suggested tools & supplies
In most cases you’ll want basic hand tools, trim tools, clean microfiber towels, isopropyl alcohol, and masking tape. If using 3M tape, gentle warming (heat gun on low or a warm environment) helps improve initial adhesion. Exact tools and supplies vary by part and vehicle setup.
Important note on modifications
Only drill, trim, or perform paintwork after a successful dry test-fit and confirmed alignment. If anything looks off, stop before making permanent changes and contact us—we’ll help you verify the correct placement and approach.
After-install checklist
Verify clearance and movement (full steering lock where applicable), confirm there is no contact with heat sources, and ensure all edges are seated securely. If installed with fasteners, re-check alignment and tightness after initial use to account for settling and vibration.
Care & maintenance
Cleaning: Use a pH-neutral car shampoo and clean microfiber towels.
Avoid: harsh solvents (acetone, brake cleaner), abrasive pads, aggressive cutting compounds, and pressure-washing directly at edges/seams.
Protection: Treat the finish like painted bodywork. A quality sealant or ceramic coating may be used if compatible with your detailer's process.
For long-term gloss and UV protection, many owners choose a quality sealant or ceramic coating applied by a professional detailer. If you want recommendations for safe products for your finish or climate, contact us and we’ll help.
If something doesn’t line up
Stop before forcing, drilling, trimming, or making any permanent changes. Misalignment is often caused by aftermarket bumpers/diffusers, prior repairs/bodywork, or positioning during the dry-fit. Send clear photos of the mounting points, the surrounding area, and a wider shot of the overall fitment, and we’ll help you troubleshoot the correct placement and next step.
Need tracking or delivery help?
You can view shipment updates on our Order Tracking page. If you need assistance, contact us with your order number and (if applicable) photos of the box/label, and we’ll help resolve it quickly.
Need help before installing? Contact us
with clear photos of your OEM part and we’ll guide you.
Quick answers on fitment, finish, shipping, and warranty. If you're unsure about compatibility, message us with clear photos of your OEM part (and any relevant options) and we'll help confirm fitment.
Will this fit my vehicle?
Start with the Compatibility tab on this page. Fitment can vary by factory options, model-year changes, and aftermarket bumpers/diffusers.
If you'd like a quick confirmation before ordering, send clear photos of your OEM part (and any relevant options) and we'll help verify compatibility.
What warranty do you offer?
Most products include a 6–12 month limited warranty against manufacturing defects (coverage varies by item).
To protect coverage, please test-fit before any cutting, drilling, paintwork, or permanent installation.
Warranty does not cover damage caused by improper installation, accidents/impact, road debris, or harsh chemicals/cleaners.
Do your carbon-fiber parts look exactly like the photos?
Carbon fiber is hand-laid, so subtle variations in weave direction, pattern alignment, and gloss can occur—this is normal and part of the material's character.
Every piece is inspected for finish quality before it ships.
Is installation hardware included?
Hardware inclusion varies by product. If hardware is not listed in the product details, the part is typically designed to reuse OEM mounting points and factory fasteners.
For best results—and to protect the finish—professional installation is recommended.
Do parts come painted, and can I paint carbon fiber?
Most carbon-fiber parts arrive with a clear-coated finish unless otherwise stated. You can leave the carbon exposed, wrap it, or paint it for a matched look.
For best results, test-fit before any paintwork and follow your installer/body shop's prep process for proper adhesion.
When will my order ship and how do I track it?
Orders placed before 1 PM EST usually ship the same or next business day, and all in-stock items ship within 3–5 business days at the latest — with free standard shipping across the USA and Canada. If an item is made-to-order or temporarily out of stock, we'll contact you with the expected lead time.
Once your order ships, tracking is emailed automatically and you can also check updates on our Order Tracking page.
How are parts packaged, and what if there is shipping damage?
Every part is carefully packed to protect the finish in transit and shipped in a plain outer carton. Please inspect your delivery upon arrival.
If anything looks damaged or missing, take clear photos of the outer box, shipping label, packing materials, and the item, then contact us within 48 hours
so we can resolve it as quickly as possible.
Do you ship internationally?
Yes, we ship internationally. Available shipping options and rates are shown at checkout based on your destination and package size.
Import duties, taxes, and any broker/clearance fees (if applicable) are determined by your country and are the buyer’s responsibility.
Can I cancel or change my order after purchase?
If you need to change or cancel an order, please contact us as soon as possible. If the order has not shipped, we'll do our best to accommodate your request.
Once an order is in processing or has shipped, changes may be limited.
How do I care for carbon fiber?
Treat carbon fiber like painted bodywork: wash with a pH-neutral car shampoo, rinse thoroughly, and dry with clean microfiber towels.
Avoid harsh solvents, abrasive pads, and aggressive cutting compounds. If you're unsure what's safe for your finish or climate (UV/heat), message us and we'll advise.
Please Note: Products sold by Scopione are intended for lawful use only. Scopione is not affiliated with or endorsed by any vehicle manufacturer.
All logos, names, and images shown are used for nominative and informational purposes.
Still have questions? Contact us
Scopione is designed for enthusiasts who expect precise fitment, a high-quality finish, and a premium buying experience. Here is what you can count on when you choose Scopione carbon-fiber products.
Fitment confidence
- Compatibility-first: start with the Compatibility tab for the most accurate fitment notes.
- Pre-purchase support: if anything is unclear, send clear photos of your OEM part and we’ll help verify compatibility.
- Installer-friendly process: we recommend a dry test-fit before any paintwork or permanent modifications.
Premium finish standards
Carbon fiber is hand-laid, so subtle variations in weave direction, pattern alignment, and gloss can occur—this is normal and part of the material. Every piece is inspected for overall finish quality before it ships.
Premium ownership experience
- Protected shipping: parts are carefully packed to help protect the finish in transit and shipped in a plain outer carton.
- Fast resolution: if anything arrives damaged or missing, contact us within 48 hours with clear photos and we’ll assist promptly.
- Warranty clarity: most products include a 6–12 month limited warranty against manufacturing defects (coverage varies by item).
Care & maintenance guidance
We provide clear care guidance so your carbon fiber stays looking its best: wash with a pH-neutral car shampoo, dry with clean microfiber towels, and avoid harsh solvents or abrasive pads.
Please Note: Products sold by Scopione are intended for lawful use only. Scopione is not affiliated with or endorsed by any vehicle manufacturer.
All logos, names, and images shown are used for nominative and informational purposes.
Still have questions? Contact us
Shop
Reviews
There are no reviews yet.