Carbon Fiber Oil Cooler Side Covers Pair by Scopione for 2020-2025 Ducati Streetfighter V4 & V4 S – In Place of the Factory Lower Fairing Caps 4801A711BA / 4801A721BA
Set off the flanks of your Ducati Streetfighter V4, Streetfighter V4 S and Streetfighter V4 SP / SP2 with genuine carbon-fiber Oil Cooler Side Covers Pair Lower Fairing Caps. Built for exterior impact, these carbon fiber Oil Cooler Side Covers Pair Lower Fairing Caps deliver an aggressive, head-turning upgrade for the Streetfighter V4, pairing a lightweight build with a flawless, mirror-deep finish. Molded in authentic 2×2 3K twill weave under a glossy, UV-resistant clear coat, they replace the factory lower fairing caps and clip and screw to the lower side fairing with the factory fixings – no cutting needed. They’re made for the listed years and won’t fit 2025-On New-Generation Streetfighter V4 / V4 S (New Side Fairings Without This Cap), Streetfighter V2 / V4 Supreme Not Listed by Ducati for These Caps, Panigale V4 / V2 (Different Panels), Streetfighter 848 / 1098, or Bikes With Aftermarket Side Covers Already Fitted.
Key Features & Benefits
- Authentic Carbon Fiber – Real 2×2 3K twill weave, not a hydro-dipped or printed finish.
- OEM-Style Fitment – Made as a replacement for the Ducati Streetfighter V4, Streetfighter V4 S and Streetfighter V4 SP / SP2.
- UV-Resistant Clear Coat – Glossy finish that resists fading and the elements.
- Straightforward Install – Secures with the factory screw at the bottom and the clip at the top of each cap on the side fairing (reused, not included); no cutting or drilling.
Why Choose Scopione?
- Fitment Specialists – A focused catalog of model-specific aftermarket parts.
- Model-Specific Design – Each part is made for a specific make, model, and year range.
- Careful Packaging – Boxed to arrive safely.
- Here to Help – Questions on fitment? Compare against the photos or reach out before you buy.
Compatibility
Oil Cooler Side Covers Pair Fits the Ducati Models Below – Each Cover Clips and Screws to the Lower Side Fairing in Place of the Factory Cap:
- Fits Ducati Streetfighter V4 Models: 2020, 2021, 2022, 2023, 2024, 2025
- Fits Ducati Streetfighter V4 S Models: 2020, 2021, 2022, 2023, 2024, 2025
- Fits Ducati Streetfighter V4 SP / SP2 Models: 2022, 2023, 2024, 2025
- **Fits Only: 2020-2025 First-Generation Streetfighter V4 / V4 S (incl. the 2025 Carry-Over), 2022 V4 SP and 2023-2025 V4 SP2 Fitted With the Factory Lower Fairing Caps Beside the Oil Cooler – Ducati 4801A711BA / 4801A721BA (2020-2022 and SP / SP2) or Their Revision 4801A711BB / 4801A721BB (2023-2025 V4 / V4 S) – as Shown on Images
- **Will NOT Fit: 2025-On New-Generation Streetfighter V4 / V4 S (New Side Fairings Without This Cap), Streetfighter V2 / V4 Supreme Not Listed by Ducati for These Caps, Panigale V4 / V2 (Different Panels), Streetfighter 848 / 1098, or Bikes With Aftermarket Side Covers Already Fitted
- **Note: Sold as a PAIR – one right and one left cover. Direct replacement for the factory lower fairing caps beside the oil cooler – Ducati 4801A711BA ‘cap RH’ and 4801A721BA ‘cap LH’, position 14 of the right / left fairing groups (GBP 66 each) on the 2020-2022 Streetfighter V4 / V4 S and the 2022 V4 SP / 2023-2025 V4 SP2, revised as 4801A711BB / 4801A721BB on the 2023-2025 V4 / V4 S – the slim curved strips that close the lower side fairing beside the oil cooler, under the toe caps. Each carbon cover copies the factory cap’s outline with a metal bushing pressed into the screw hole and goes on with the factory screw and clip, which are reused – no hardware is included. The 2025 new-generation Streetfighter V4 has new side fairings without this cap and is not covered. Compare the images with the caps on your bike before ordering.
Installation:
- Parts are hand made to Replace Factory Lower Fairing Caps
- No modifications are needed
- Professional Installation is advised
- Parts are designed specifically for your make and model
- Secured in place with the factory screw at the bottom and the clip at the top of each cap on the side fairing (reused, not included)
Scopione Package Contents:
- ( 1 ) One Packaging Box
- ( 1 ) Right Oil Cooler Side Cover
- ( 1 ) Left Oil Cooler Side Cover
- ( 0 ) Installation Manual, Tools, Hardware are NOT Included
The Short Version
Real carbon-fiber looks, factory-style fit, made for the Ducati Streetfighter V4, Streetfighter V4 S and Streetfighter V4 SP / SP2.
Additional Information:
Note: If, at any time, you decide to remove the Scopione part(s), the process is fully reversible.
Replaces the Factory Lower Fairing Cap Part Numbers (Right / Left 2020-2022 + SP / SP2, Right / Left 2023-2025): 4801A711BA | 4801A721BA | 4801A711BB | 4801A721BB
Installation guidance for Scopione replacement and add-on parts. For best results, test-fit before any paintwork, drilling, trimming, or permanent installation. If you would like us to confirm compatibility or your installation approach before you begin, contact us with clear photos of your OEM part and any relevant options.
Quick install overview
- Unbox & inspect: confirm the part, finish, and contents before starting. Keep all packaging until installation is complete.
- Dry test-fit first: verify alignment, gaps, and clearance before any drilling, trimming, paintwork, or permanent mounting.
- Replacement parts: typically use OEM mounting points and may reuse factory hardware—tighten evenly and avoid over-torquing carbon.
- Add-on parts: may install with 3M VHB tape, brackets, or light trimming depending on your setup and existing modifications.
- Protect the finish: use clean microfiber towels and masking tape on edges while positioning and aligning.
- Professional installation recommended: especially for aero components and precision-fit parts.
Before you start
Work on a clean, well-lit surface. Confirm left/right orientation, compare the part to your OEM component, and verify that mounting points and edges align during a dry-fit. If your vehicle has aftermarket bumpers/diffusers, previous repairs, or custom bodywork, fitment may vary—do not force alignment before checking the install position.
Dry-fit & alignment tips
Position the part gently and never force it into place. If fasteners are used, hand-start them first, then check gaps, edge alignment, and clearance before tightening evenly. Use low-tack tape to mark reference points so you can repeat the exact placement after cleaning or adhesive preparation.
Adhesive installs (3M tape)
Prep is everything. Clean both surfaces with isopropyl alcohol, make sure they are fully dry, and install in a warm environment whenever possible. Apply firm, even pressure along the entire tape line to ensure full contact. For best adhesion, avoid washing or rain exposure immediately after installation and allow adequate cure time before heavy use.
Fastener installs (bolts/screws/clips)
Hand-start all fasteners to prevent cross-threading, then tighten gradually and evenly to keep the part aligned. Do not over-tighten—carbon fiber can crack from excessive point load. When possible, follow OEM torque guidance for that mounting location and use washers/spacers as appropriate to distribute pressure.
Installation details
- Details: Installation specifics depend on the part. Review the Part Details and Features tabs for guidance, or contact us for confirmation before you begin.
Suggested tools & supplies
In most cases you’ll want basic hand tools, trim tools, clean microfiber towels, isopropyl alcohol, and masking tape. If using 3M tape, gentle warming (heat gun on low or a warm environment) helps improve initial adhesion. Exact tools and supplies vary by part and vehicle setup.
Important note on modifications
Only drill, trim, or perform paintwork after a successful dry test-fit and confirmed alignment. If anything looks off, stop before making permanent changes and contact us—we’ll help you verify the correct placement and approach.
After-install checklist
Verify clearance and movement (full steering lock where applicable), confirm there is no contact with heat sources, and ensure all edges are seated securely. If installed with fasteners, re-check alignment and tightness after initial use to account for settling and vibration.
Care & maintenance
Cleaning: Use a pH-neutral car shampoo and clean microfiber towels.
Avoid: harsh solvents (acetone, brake cleaner), abrasive pads, aggressive cutting compounds, and pressure-washing directly at edges/seams.
Protection: Treat the finish like painted bodywork. A quality sealant or ceramic coating may be used if compatible with your detailer's process.
For long-term gloss and UV protection, many owners choose a quality sealant or ceramic coating applied by a professional detailer. If you want recommendations for safe products for your finish or climate, contact us and we’ll help.
If something doesn’t line up
Stop before forcing, drilling, trimming, or making any permanent changes. Misalignment is often caused by aftermarket bumpers/diffusers, prior repairs/bodywork, or positioning during the dry-fit. Send clear photos of the mounting points, the surrounding area, and a wider shot of the overall fitment, and we’ll help you troubleshoot the correct placement and next step.
Need tracking or delivery help?
You can view shipment updates on our Order Tracking page. If you need assistance, contact us with your order number and (if applicable) photos of the box/label, and we’ll help resolve it quickly.
Need help before installing? Contact us
with clear photos of your OEM part and we’ll guide you.
Quick answers on fitment, finish, shipping, and warranty. If you're unsure about compatibility, message us with clear photos of your OEM part (and any relevant options) and we'll help confirm fitment.
Will this fit my vehicle?
Start with the Compatibility tab on this page. Fitment can vary by factory options, model-year changes, and aftermarket bumpers/diffusers.
If you'd like a quick confirmation before ordering, send clear photos of your OEM part (and any relevant options) and we'll help verify compatibility.
What warranty do you offer?
Most products include a 6–12 month limited warranty against manufacturing defects (coverage varies by item).
To protect coverage, please test-fit before any cutting, drilling, paintwork, or permanent installation.
Warranty does not cover damage caused by improper installation, accidents/impact, road debris, or harsh chemicals/cleaners.
Do your carbon-fiber parts look exactly like the photos?
Carbon fiber is hand-laid, so subtle variations in weave direction, pattern alignment, and gloss can occur—this is normal and part of the material's character.
Every piece is inspected for finish quality before it ships.
Is installation hardware included?
Hardware inclusion varies by product. If hardware is not listed in the product details, the part is typically designed to reuse OEM mounting points and factory fasteners.
For best results—and to protect the finish—professional installation is recommended.
Do parts come painted, and can I paint carbon fiber?
Most carbon-fiber parts arrive with a clear-coated finish unless otherwise stated. You can leave the carbon exposed, wrap it, or paint it for a matched look.
For best results, test-fit before any paintwork and follow your installer/body shop's prep process for proper adhesion.
When will my order ship and how do I track it?
Orders placed before 1 PM EST usually ship the same or next business day, and all in-stock items ship within 3–5 business days at the latest — with free standard shipping across the USA and Canada. If an item is made-to-order or temporarily out of stock, we'll contact you with the expected lead time.
Once your order ships, tracking is emailed automatically and you can also check updates on our Order Tracking page.
How are parts packaged, and what if there is shipping damage?
Every part is carefully packed to protect the finish in transit and shipped in a plain outer carton. Please inspect your delivery upon arrival.
If anything looks damaged or missing, take clear photos of the outer box, shipping label, packing materials, and the item, then contact us within 48 hours
so we can resolve it as quickly as possible.
Do you ship internationally?
Yes, we ship internationally. Available shipping options and rates are shown at checkout based on your destination and package size.
Import duties, taxes, and any broker/clearance fees (if applicable) are determined by your country and are the buyer’s responsibility.
Can I cancel or change my order after purchase?
If you need to change or cancel an order, please contact us as soon as possible. If the order has not shipped, we'll do our best to accommodate your request.
Once an order is in processing or has shipped, changes may be limited.
How do I care for carbon fiber?
Treat carbon fiber like painted bodywork: wash with a pH-neutral car shampoo, rinse thoroughly, and dry with clean microfiber towels.
Avoid harsh solvents, abrasive pads, and aggressive cutting compounds. If you're unsure what's safe for your finish or climate (UV/heat), message us and we'll advise.
Please Note: Products sold by Scopione are intended for lawful use only. Scopione is not affiliated with or endorsed by any vehicle manufacturer.
All logos, names, and images shown are used for nominative and informational purposes.
Still have questions? Contact us
Scopione is designed for enthusiasts who expect precise fitment, a high-quality finish, and a premium buying experience. Here is what you can count on when you choose Scopione carbon-fiber products.
Fitment confidence
- Compatibility-first: start with the Compatibility tab for the most accurate fitment notes.
- Pre-purchase support: if anything is unclear, send clear photos of your OEM part and we’ll help verify compatibility.
- Installer-friendly process: we recommend a dry test-fit before any paintwork or permanent modifications.
Premium finish standards
Carbon fiber is hand-laid, so subtle variations in weave direction, pattern alignment, and gloss can occur—this is normal and part of the material. Every piece is inspected for overall finish quality before it ships.
Premium ownership experience
- Protected shipping: parts are carefully packed to help protect the finish in transit and shipped in a plain outer carton.
- Fast resolution: if anything arrives damaged or missing, contact us within 48 hours with clear photos and we’ll assist promptly.
- Warranty clarity: most products include a 6–12 month limited warranty against manufacturing defects (coverage varies by item).
Care & maintenance guidance
We provide clear care guidance so your carbon fiber stays looking its best: wash with a pH-neutral car shampoo, dry with clean microfiber towels, and avoid harsh solvents or abrasive pads.
Please Note: Products sold by Scopione are intended for lawful use only. Scopione is not affiliated with or endorsed by any vehicle manufacturer.
All logos, names, and images shown are used for nominative and informational purposes.
Still have questions? Contact us
Shop
Reviews
There are no reviews yet.